Air-to-water heat pump Daikin Altherma 3 EBSH11P30D+ERLA11DV3 11 kW- with tank ECH2O (single-phase)
1 photosPackage contents
| Component | Model and details | Quantity |
|---|---|---|
| Internal unit | EBSH11P30DModel indicated in the commercial configuration. | 1 |
| Outdoor unit | ERLA11DV3Model indicated in the commercial configuration. | 1 |
| Integrated tank | 300 lIntegrated in equipment; it is not an additional unit. | 1 |
Not included
- The assembly is not included in the equipment configuration presented.
- The remote control is not included (Madoka BRC1HHDW/S/K).
Optional extras
- LAN adapter for application control.
Package conditions
- The size shall be determined by the thermal need of the building, the lap temperature and the external design conditions.
- Installation materials, electrical protection, putting into service and hydraulic accessories shall be set out in the project offer.
- The source has different values for the Operating Mode: -25... +43 ° C / -25... +60 ° C Consult the exact documentation of the configuration.
- The additional source table indicates 8 KW, different from the 11 kW class of the designation. The value in the table is not used in filtration.
Description
Air-to-water configuration Daikin for heating. The commercial heat class shall be 11 kW. The units models and components identified are shown below.
The inner unit integrates the domestic hot water tank with a declared volume of 300 litres.
Performance depends on air and water temperature. Compare values COP / SCOP only for the same test conditions. Check in PDF the supply of each unit and spare heater as well as the spaces required for installation.
Technical specifications
Identification
- Brand
- Daikin
- Models in configuration
- EBSH11P30D + ERLA11DV3
- Configuration
- Floor-standing hydrotank
Performance
- Thermal power class
- 11 kW Class used in the catalogue. The nominal values and test conditions shall be consulted separately in the documentation; they are not electric consumption.
Date tehnice
- Clasa energetica
- A++
- Nivel presiune sonora unitate interioara
- 36 dB
- Operating mode
- -25 … +43 °C Value from initial presentation; the source contains different information in another section. It checks in PDF.
- Agent frigorific
- R-32
- Power supply
- monofazata
- UI dimensions
- 1.893x594x680 mm
- EU dimensions
- 870×1.100×460
Caracteristici
- Tip unitate
- Heat pump
- Culoare
- White
- Minimum declared external temperature
- -25 grade Celsius
Household hot water
- Volum rezervor integrat
- 300 l
PDF documents
Manufacturer documents cover the listed configuration or product series. Check the exact model and document revision before design or installation.
Frequently asked questions
Does it work on heating in winter?
Yes, the configuration is intended for heating. The declared outer limit is -25 degrees Celsius. The available power depends on the air temperature and the lap temperature; for size, the curves in the PDF are consulted.
Where does this kind of unit fit in?
The tank module shall be placed inside on the floor and the outer unit in the outer space. The service distances, drainage and documentation requirements shall be respected.
What kind of refrigerant does he use?
The declared refrigerant is R-32. The load quantity and installation conditions shall be checked for the exact unit code in PDF.
What's his energy class?
The class indicated in the configuration specifications is A + +. Class and efficiency shall be read for the energy label regime and conditions.
Can you control it from your phone?
Network control may require a compatible accessory. LAN adapter for application control. Optional accessories are not implicitly included in the price.
What color is it available?
The version presented is white. The control shall be identified by the exact codes EBSH11P30D + ERLA11DV3.
What's the capacity for the equipment?
The thermal class in the catalogue is 11 kW. The nominal values at each test point are given in specifications and PDF.
What equipment are included?
The configuration presented includes: 1 × EBSH11P30D; 1 × ERLA11DV3; 1 × 300 l (Integrated in equipment; does not represent an additional unit.). Accessories appearing in the photograph shall only be included if they are listed in the component list.
Power in kW is electric consumption?
No. 11 kW is the heat class used in the catalogue. Electric consumption depends on operating conditions and efficiency. The power values and COP in the datasheet shall be compared to the same air and water temperatures.
What power supply does it require?
The configuration is presented as single-phase. Check in the manual the supply of the external unit, the inner unit and the spare heater; they may have separate requirements.
Does it have a hot water tank included?
The configuration integrates a tank of 300 l. It is part of the unit and is not additional equipment. The volume and conditions of use are detailed in the documentation.
Is the assembly included?
The offer submitted is for equipment. The assembly, the installation materials and the putting into service shall be set separately, depending on the configuration and conditions at the location.
Which accessories should be ordered separately?
LAN adapter for application control. The remote control is not included (Madoka BRC1HHDW/S/K). Confirm the compatibility of the accessories with the exact models in the offer.
Where do I find the datasheet and the textbooks?
The "PDF Files" section on this page contains the available documentation. The range documents are clearly marked; look for the exact unit code and check the revision of the document before design or assembly.
The displayed price and availability are confirmed?
Prices are provisional, displayed free of VAT and VAT, using the simulation rate indicated on the page. The final price NORDLINE, stock, delivery time and guarantee conditions shall be confirmed for the model and quantity requested.
